1 = 700 series for most standard applications. 8 = 800 series for ceramic and high thermal demand applications. 0 = 600 series also available for temperature sensitive applications. to order these series, replace 1 with 8 or 0. 7 = 700 series for most standard applications. 8 = 800 series for ceramic and high thermal demand applications. to order this series, replace 7 with 8. download the surface mount removal techniques using mx-5000 soldering and rework system technical note from www.metcal.com 10 long reach standard uftc tip cartridges for metcal ultrafine tm hand-piece ? a mm (") ? b mm (") stdc- 102 cartridge, desolder 0.64mm (0.025") 1.40mm (.055") stdc- 103 cartridge, desolder 0.76mm (0.076") 1.68mm (.066") stdc- 104 cartridge, desolder 1.02mm (0.04") 1.78mm (.070") stdc- 105 cartridge, desolder 1.27mm (0.05") 2.03mm (.080") stdc- 106 cartridge, desolder 1.52mm (0.06") 2.29mm (.090") stdc- 107 cartridge, desolder 2.41mm (0.095") 3.18mm (.125") stdc- 7 03l cartridge, desolder long reach 0.76mm (0.03") 1.68mm (.066") stdc- 7 04l cartridge, desolder long reach 1.02mm (0.04") 1.79mm (.070") stdc- 7 05l cartridge, desolder long reach 1.27mm (0.05") 2.03mm (.080") stdc desolder cartridges for desoldering hand-piece the metcal mx-ds1 desoldering hand-piece provides exceptional ability for safely desoldering through-hole components. the high-mass stdc cartridges store a high volume of heat while maintaining a non-damaging constant temperature. coupled with the mx-5000 power supply, heat is rapidly replenished, dynamically responding to the load conditions. 7 = 700 series for most standard applications. uftc tip cartridges are only available in 700 series uftc- 7 cn01 uftc- 7 ch08 uftc- 7 cn02 uftc- 7 ch12 uftc- 7 cn04 uftc- 7 chl06 uftc- 7 cnl04 uftc- 7 chl08 uftc- 7 cnb02 uftc- 7 drh408 uftc- 7 cnb04 uftc- 7 drh412 uftc- 7 ch06 ultrafine ? tip cartridge, conical 0.13mm x 5.1mm (0.005" x 0.2") ultrafine ? tip cartridge, chisel 0.8mm x 5.1mm (0.03" x 0.2") ultrafine ? tip cartridge, chisel 1.2mm x 5mm (0.05" x 0.2") ultrafine ? tip cartridge, chisel, long 0.6mm x 9mm (0.024" x 0.35") ultrafine ? tip cartridge, chisel, long 0.8mm x 9mm (0.03" x 0.35") ultrafine ? tip cartridge, hoof, micro 0.8mm x 5.1mm (0.03" x 0.2") ultrafine ? tip cartridge, conical 0.2mm x 5mm (0.01" x 0.2") ultrafine ? tip cartridge, conical 0.4mm x 5mm (0.02" x 0.2") ultrafine ? tip cartridge, conical, long 0.4mm x 9mm (0.02" x 0.31") ultrafine ? tip cartridge, conical, bent 0.2mm x 5.5mm (0.01" x 0.22") ultrafine ? tip cartridge, conical, bent 0.4mm x 5.5mm (0.02" x 0.22") ultrafine ? tip cartridge, chisel 0.6mm x 5.1mm (0.024" x 0.2") ultrafine ? tip cartridge, hoof, micro 1.2mm x 5.1mm (0.048" x 0.2") new 0.400" 9
|